MTB/SBoot Project for Combat Flight Simulator 3.1

This project is a work around to a flightsim into a fast boat game based on the MTB’s and Sboots of WW2. As a result of this there are some issues that need to be taken into account when playing and installing this addon. If you have any concerns about your ablity to setup all the parts needed after reading these instructions, I would suggest you don’t continue.

INSTALL

The first thing is to put the drive able MTB and Sboot into CFS3’s Aircraft folder.

Place the ship models in the ship folder. Place the building models in the Building folder. The one exception is the blockhouse. This goes in the Vehicle folder. Place the Facilities in the Facility folder. Place the “Mine” folder in the building folder and its facility file in the facilities folder.

Note
Check that all buildings are unzipped. If you miss one the Missions won’t work

Missions
1 Unzip the missions to the “What if “ Mission folder.

Weapons
Download AVI history weapons pack.

Ships
Down load any ships from the Groundcrew site.
Http://www.groundcrewdesign.com

Aircraft models
Download all Aircraft listed in the mission description.
OPERATION ISSUES

1. Make sure you have Scroll lock on before you start a mission.

2. Use the F6 key to go to different pilot views

3. Torpedos only run 700m so you have to get in close

4. The damage isn't sorted just yet. There maybe hickups when you get damaged or killed.
Eg the boat will die but keep going until you stop. Then it will die. But you can't use the guns .

5. The wingmen won't work, so the other boats you see are just ship versions that are following your track. They are good to follow to the action.

6 The warp won't work. So I try and keep the missions short no more than half an hour.

7 I think you always are told you failed the mission. You can judge for yourself if you won or not. I think this is because you never took off.

The SBoot harbour defence mission - In this mission your goal is to protect your base from a sneak attack by a small British force.

Tips for this mission

1. Be careful leaving the harbour you will cross the line of fire of the Mboot which is tied up at the breakwater .

2. Once out of port it is up to you how you attack the in coming force.

3. When the battle is over complete the way points and return to the port.

4. Don’t enter the harbour until the Minesweeper has stopped firing at the wreaks. You might get hit.

DOWNLOAD - 12.0 MB